Chronological Thread 

< Chronological >      < Thread >

---

Ok,

Before somebody tries to RTM me, I read the manual and the FAQ, and I still
don't understand HOW can I use labels. Two examples:


I want to have equations, such as

x=1+y (1)
y=2/x (2)
etc.

in which the number of the equations are entered automatically. Also I want
to
refer to equation 1 in a way that if I had an equation BEFORE equation 1, it
changes the reference in all the document to equation 2.

The same thing applies to figures and tables. So if I have figure 1 in the
text, how can I reference to it?

Sorry if this sounds like a novice question (it is), but neither the manul
not
the FAQ are clear on this point.

Thanks!

Carlos

--
--------------------------------------------------
Carlos Filipe Moreira Duarte,Lic. Chem. Eng.
Ph.D. Student
Laboratory of Separation and Reaction Engineering
Department of Chemical Engineering
Faculty of Engineering - University of Porto
Rua Dr. Roberto Frias, S/N
4200-465 Porto - PORTUGAL

Tel.:+351 22 508 1636 Fax.:+351 22 508 1674
Email: address@hidden
--------------------------------------------------

---

• Labels - How to use them, Carlos Duarte, 09/08/2003
  • <Possible follow-up(s)>
  • Re: Labels - How to use them, Norbert Nemec, 09/08/2003

---

Archive powered by MHonArc 2.6.19.