- From: Joris van der Hoeven <address@hidden>
- To: address@hidden
- Subject: Re: [TeXmacs] IME (for Japanese) does not work on (qt-)texmacs-1.07.16
- Date: Tue, 28 Aug 2012 13:22:07 +0200
Hi,
Thanks for your detailed report. The persons who work on this kind of
issues are still on holidays, but we will look into the problem.
Best wishes, --Joris
On Mon, Aug 27, 2012 at 12:21:44PM +0900, Takama M. wrote:
>
I'm a Japanese texmacs user.I use texmacs compiled on my
>
PC (Ubuntu 12.04 LST).
>
I have been often annoyed with using IME on qt-texmacs
>
for Japanese input.
>
(I suspect that the situation below is similar for other cjk
>
languages.)
>
>
The combination of qt-texmacs and the IME for Japanese input such
>
as ibus seems not stable enough to use. In fact ibus-kde + anthy(
>
or other input method back-end such as Mozc) works on
>
texmacs-1.0.7.15, but ibus + anthy(or Mozc) does not work well,
>
though I don't know why and what's the true difference between
>
ibus-kde and ibus.
>
>
Now disappointedly I found even ibus-kde + anthy could not be
>
used on texmacs-1.0.7.16 for Japanese input.
>
>
For example, to input "有難う" (meaning "Thanks" in Japanese), we
>
must proceed the following steps.
>
>
step1: press Ctrl+Space (or other special key) to enter into
>
Japanese Input mode
>
step2: type alphabetical characters "arigatou"
>
step3: press SPACE (to convert it into kana + kanji,
>
and press SPACE more times to change the candidate of
>
the conversion if need), then
>
"arigatou" transforms into "有難う"
>
step4: press ENTER to decide the candidate.
>
>
Upto the step3 is OK, but after pressing Enter(step4) all
>
characters disappear.
>
>
I compiled both of texmacs-1.0.7.15 and 1.0.7.16 on the same
>
environment. (Before using the different version, I removed
>
.TeXmacs/system directory.)
>
What change causes the different behavior of the input method?
>
>
Remarkably in the footer area (which appears when pressing F1 for
>
HELP) kana-kanji conversion can always be accomplished, (but in
>
the main text area, not.)
>
>
Thanks
>
>
-----
>
Takama M.
- Re: [TeXmacs] IME (for Japanese) does not work on (qt-)texmacs-1.07.16, Joris van der Hoeven, 08/28/2012
Archive powered by MHonArc 2.6.19.