Skip to Content.
Sympa Menu

texmacs-users - Re: [TeXmacs] My first non-trivial macro

Subject: mailing-list for TeXmacs Users

List archive

Re: [TeXmacs] My first non-trivial macro


Chronological Thread 
  • From: "David G. Wonnacott" <address@hidden>
  • To: address@hidden
  • Cc: address@hidden
  • Subject: Re: [TeXmacs] My first non-trivial macro
  • Date: Sat, 8 Jul 2006 15:33:19 -0400 (EDT)
  • Hc-host: Message scanned by NISC4, Networking & Systems, Haverford College, Haverford, PA 19041 [v011]
  • Hc-mailscanner: Found to be clean

Date: Tue, 4 Jul 2006 19:32:17 +0200
From: Joris van der Hoeven <address@hidden>

On Sun, Jul 02, 2006 at 07:25:34PM +0200, Henri Lesourd wrote:
...
> I just tried what you describe, and it seems that the <include>
> macro doesn't tolerate anything other than constant urls as a
> parameter.

Yes, that is indeed a problem, which I have just corrected on the CVS
version.
Notice however that you also should use the "merge" primitive in order to
concatenate strings.

I've been trying to use the CVS version and having some trouble. This
is on a Macintosh running MacOS 10.3 with a unix-formatted disk
partition for user files; texmacs 1.0.5 installed via fink works
perfectly. I would like to install the CVS version of texmacs in my
own account.

I obtained the source via anonymous CVS without any problem, and then did:

./configure --prefix=/Volumes/UFS/Users/davew/lib/TeXmacs/
make && make install

and got texmacs and fig2ps in my lib/TeXmacs directory without any
trouble at all. I added this to my path, and then tried to run
TeXmacs, but got lots of font errors followed by a statement that "Tex
seems not to be installed properly" (see transcript below). I ftp'd
the type 1 fonts from the web site in case that would help, removed my
old .TeXmacs directory, and tried again, getting essentially the same
errors (I think there was no error about the font ecrm10.123pk but the
rest were still there).

Can you give any other advice about how to get this working? I'm
planning to also try the same sequence on an Ubuntu linux box I could
use if necessary.

Dave W



texmacs
Welcome to TeXmacs 1.0.6.4
------------------------------------------------------------------------------
Since this seems to be the first time you run this
version of TeXmacs, I will first analyze your system
in order to set up some TeX paths in the correct way.
This may take some seconds; the result can be found in

/Users/davew/.TeXmacs/system/settings.scm

------------------------------------------------------------------------------
TeXmacs] kpsepath works with your TeX distribution
TeXmacs] kpsewhich works with your TeX distribution
TeXmacs] mktextfm works with your TeX distribution
TeXmacs] mktexpk works with your TeX distribution
TeXmacs] texhash works with your TeX distribution
TeXmacs] Trying to create ecrm10.123pk from 300 dpi
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
mktexpk: Mismatched mode ljfour and resolution 300; ignoring mode.
mktexpk: Running mf-nowin -progname=mf \mode:=cx; mag:=123/300; nonstopmode;
input ecrm10
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm10.log: No such file or directory
mktexpk: `mf-nowin -progname=mf \mode:=cx; mag:=123/300; nonstopmode; input
ecrm10' failed to make ecrm10.123pk.
TeXmacs] Metafont works with 300 dpi ec-fonts
------------------------------------------------------------------------------
Installation completed successfully !
I will now start up the editor
------------------------------------------------------------------------------
TeXmacs] Generating font file ecrm11.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm11
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm11.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm11' failed to make ecrm11.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm10.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm10
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm10' failed to make ecrm10.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm12.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm12
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm12.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm12' failed to make ecrm12.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm9.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm9
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm9.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm9' failed to make ecrm9.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm13.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm13
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm13.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm13' failed to make ecrm13.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm1100.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm1100
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm1100.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm1100' failed to make ecrm1100.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm1000.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm1000
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm1000' failed to make ecrm1000.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm1200.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm1200
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm1200.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm1200' failed to make ecrm1200.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm900.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm900
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm900.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm900' failed to make ecrm900.tfm.
TeXmacs] Done
TeXmacs] Generating font file ecrm1300.tfm
TeXmacs] Please wait...
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ecrm1300
This is METAFONT, Version 2.71828 (Web2C 7.5.4)
kpathsea: Running mktexfmt mf.base
tcfmgr: config file `tcfmgr.map' (usually in $TEXMFMAIN/texconfig) not found.
fmtutil: config file `fmtutil.cnf' not found.
I can't find the base file `mf.base'!
grep: ecrm1300.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input
ecrm1300' failed to make ecrm1300.tfm.
TeXmacs] Done


I could not open ecrm11@300

Fatal error: Tex seems not to be installed properly in 'load_tex'
See file : load_tex.cpp



Archive powered by MHonArc 2.6.19.

Top of Page